没有通用的解决方案与I / O相关的所有问题的接口
奥维尔·哈斯,威廉·e·昆兹
时钟频率的射频干扰的来源几兆赫,今天的电子系统使用脉冲边缘亚毫微秒。网络接口提供超过100 mbit / s的数据传输速率(快速以太网和FDDI-fiber分布式数据接口)和155和622 mbit / s (ATM-Asynchronous传输模式)。高质量视频电路也使用像素利率sub-nanosecond率。这些更高的处理速度永不停歇的工程挑战。其中一个挑战是射频干扰,这源于一个快速变化的电磁能量。转换速度越快(上升/下降时间)和电压/电流幅值越高,越roblematic电路。因此,电磁兼容性(EMC)是今天比以往任何时候都更难做到。两个节点之间的快速变化的电流脉冲电路代表所谓的微分噪声源,和周围的场这样一个电路可以到其他组件和腐蚀连接。通过电感或电容耦合噪声诱导代表commonmode干扰。射频干扰电流在相位,系统可以建模为一个连接源,“受害者电路”或“接受者”,和返回的路径,这在许多情况下由底盘。 Several factors are critical in defining the amount of the interference:• Strength of the source• Size of the area encircled by the culprit current• Slew rate of the change Thus, despite many possible causes of unwanted interference in a circuit, the noise is almost always the common-mode type. Once there is some RF voltage present between a cable plugged into an I/O (input/output) connector and the enclosure or the ground plane, the resulting RF current of a few mA can be enough to exceed the allowable emission levels.Click the pdf below to read the full article.